Epson WF-C5790 Service Manual page 544

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
E1
Dowels and positioning holes
1. Remove the two screws (S4: ), then remove the Middle Frame.
When installing the Middle Frame, attach the two dowels of the frame to the two
positioning holes of the Middle Frame.
Disassembly/assembly
Middle Frame
Middle Frame
No. Screw Type
S4
C.B.P-TITE-SCREW-3x10-F.ZN-3C
Disassembly/Reassembly Procedures
E2
Top
Photo Sensor
Photo sensor cable
1. Disengage four hooks using precision screw driver or similar tool, then remove the Photo
Sensor from frame.
2. Disconnect the photo sensor cable from the connector, then remove the Photo Sensor.
Revision A
Photo Sensor
Hook
544
Confidential