EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
A11
B11
C11
D11
Guide Cover
1. Remove the two screws (S4: ), and remove the Guide Cover in the direction of the arrow.
Disassembly/assembly
Guide Cover
No.
Screw Type
S4
C.B.P-TITE-SCREW-3x10-F.ZN-3C
Disassembly/Reassembly Procedures
A12
B12
C12
D12
CN10
CN22
CN11
CN12
Tabs
Ink End Sensor (C/M) (CN30)
Ink End Sensor (Bk/Y) (CN31)
Ink Leak Sensor 1 (CN11)
Ink Leak Sensor 2 (CN12)
Ink Leak Sensor 3 (CN54)
Ink Leak Sensor 4 (CN55)
Temperature and Humidity Sensor(CN10)
1. Disconnect the cables from the connectors (CN2, CN10, CN11, CN12, CN22, CN30,
CN31, CN54, CN55) on the Relay Board.
2. Release the cables from the five tabs on the Frame Base.
Revision A
RIPS Unit
Relay Board
CN55
CN54
CN30
CN31
CN2
Drawer Connector (CN2)
Cover Open Sensor (CN22)
302
Confidential