Epson WF-C5790 Service Manual page 175

Color inkjet printer
Hide thumbs Also See for WF-C5790:
Table of Contents

Advertisement

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
Time
Commands/
Direction
(10ms)
responses name
03130
<-
PPS-EOP
03131
->
PPR
03239
<-
PIX
04770
<-
PPS-EOP
04771
->
PPR
Troubleshooting
Table 4-4. Commands/responses log_ Sample Example (Type = Sending)
Data
BF2F0000FD
BC00000000F8FFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FF
[33,600 bps(V.34) / MMR / A4 / 8x7.7 / 0(E:0)]
BF2F0000DA
BC0000000000000000000000F0FFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFF
Fax Troubleshooting
Description
Received a end of procedure signal (the 1st page finished without next page).
FCF=BF2F?FIF=0000FD (00=1st page, 00=1st block, FD=254 frames)
If the number of frame exceeds 256, separates the page with PPS-NULL to send.
The frame size of PPS-NULL is always FF.
PPS-MPS is a signal of ECM mode. MPS is used in non-ECM mode.
Since there was an error in received PIX, specifies the error frame and requests
retransmission. (A signal of ECM mode)
How to specify the error frame: Regard FFFF as one unit to represent 1 to 16 frames.
16 sets of FFFF mean 256 frames in total.
Since 254 frames were sent, entry 1 to the 255th to 256th frame.
Entry 1 to the reception error frame. The request starts from 0000 0000 F8FFF FFFF.
This means that 35 frames (1st to 35th) are succeeded, and 259 frames
(the 36th to 254th) are required to retransmit.
Received a frame retransmission request for the 1st page of image signal.
Communication status is described within [ ].
Communication speed (Protocol)
:33.6kbps(V.34)
Encoding method
: MMR
Paper width
: A4
Resolution
: 8x7.7 (Fine)
Number of line (number of error line) : 0(E:0) *. when ECM = OFF
Received a end of procedure signal (the 1st page finished without next page).
FCF=BF2F FIF=0000DA (00=1st page, 00=1st block, DD = 219 frames)
Since there was an error in received PIX, specifies the error frame and requests
retransmission. (A signal of ECM mode)
How to specify error frames: Regard FFFF as one unit to represent 1 to 16 frames.
16 sets of FFFF mean 256 frames in total.
Entry 1 to the reception error frame.
The request starts from 0000 0000 0000 0000 0000 00F0 FFFF.
This means that 57 frames (36th to 92nd) are succeeded, and 162 frames
(the 93rd to 254th) are required to retransmit.
Revision A
175
Confidential

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wf-c5790aWf-c5710Et-8700Wf-c5210Wf-c5290Wf-c5290a

Table of Contents