EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
ADF/SCN ERROR (6)
Error name
LED light failure (error code: 100032)
Cause
The LED on the CIS Module is not lit up.
Suspected cause
CIS Module failure
FFC disconnection in ADF/SCN
Main Board failure
Troubleshooting
Step
Visually check the FFCs of the ADF/SCN Unit.
1
Check the FFC (thick) in ADF/SCN to make sure it is not inserted obliquely,
folded, or damaged.
Replace the ADF/SCN Unit.
2
Does the error occur after replacing the ADF/SCN Unit?
Replace the Main Board Assy.
3
Does the error occur after replacing the Main Board Assy?
Troubleshooting
Check and measure
Troubleshooting procedure
Yes
Go to step 2
Go to step 3
Contact the EPSON Service Department.
Revision A
No
Properly connect the FFC of ADF/SCN.
Replace the ADF/SCN Unit if the FFC is
damaged.
End
End
Confidential
95