Epson WF-C5790 Service Manual page 466

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
B11
Torsion Spring Paper Back Lever
Shaft
Hook
Shaft
1. Disengage leg of the Torsion Spring from the hook on the Rear ASF Assy.
2. Release the shaft of the Paper Back Lever from the hole of the Rear ASF Assy, then remove
the Paper Back Lever.
3. Remove the Extension Spring.
4. Disengage two shafts of the Paper Feed Roller, then remove the Paper Feed Roller.
Disassembly/assembly
Paper Feed Roller
Rear ASF Assy Bottom
Extension Spring
Paper Feed Roller
Shaft
Disassembly/Reassembly Procedures
C11 D11
Plate
Rear ASF Assy
Acetate tape
No. Screw Type
S4
C.B.P-TITE-SCREW-3x10-F.ZN-3C
1. Peel off a piece of acetate tape, and release the photo interrupter cable from the hole, hook
and two grooves on the Rear ASF Assy.
2. Remove the four screws (S4: ), and remove the Plate.
Revision A
Plate
Photo
Hook
interrupter cable
Hole
Grooves
Confidential
466