Epson WF-C5790 Service Manual page 452

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a
F16
Back
Rear ASF Sensor
Connector
1. Release the cable from the hook and slit on the Rear ASF Upper Guide Assy.
The length of the two hooks on mechanical contact sensor differs. See the following
and make sure to release the shorter hook first when removing the mechanical contact
sensor.
2. Disconnect the cable from the connector of the Rear ASF Sensor.
3. Disengage hook by pushing up the sensor.
Disassembly/assembly
Rear Unit Detection Sensor
Hook (long)
Hook (short)
Mechanical Contact Sensor
Hook
Cable
Rear ASF Upper
Slit Guide Assy
Disassembly/Reassembly Procedures
Revision A
452
Confidential