Operation - Canon NP-1010 Service Manual

IV. OPERATION
A.
Control Panel
DENSITY Correction Knob
Use the knob to adjust the copy density in
the automatic or manual density adjust-
ment mode.
EXPOSURE CONTROL lever
Use the lever to darken or lighten the copy
in the manual mode.
ZOOM/COPY NUMBER Indicator
Set the number of copies to make, and
press the key; the number will be dis-
played on the indicator. The number de-
creases for each copy made and returns to
the initial number after all copies have
been made.
The indicator also displays" p "for feeding
error or absence of paper and " E "for self
diagnosis.
Press the ZOOM key, and set the
reproduction ratio desired; the ratio will be
displayed on the indicator.
CLEAR/STOP Key
Press the key to stop continuous copying;
the operation will stop after completing
the current copying cycle.
Press the key to clear the display on the
indicator in the standby mode; the copy
count will return to 'I', or the reproduction
ratio will return to '100%'.
COPY START Key
Figure l-4
ZOOM/COPY NUMBER INPUT Keys
Use the keys to set the number of copies
to make.
With a press on theI ZOOM key, a
reproduction ratio may be between 70%
and 122% in 1% increment.
ZOOM MODE Key
Press the key to set a reproduction ratio
other than those fixed.
REDUCTION/ENLARGEMENT Key
Use the key to select DIRECT, ENLARGE-
I
MENT or REDUCTION.
AE Key
Use the key to activate or deactivate the
AE (automatic density adjustment) mode.
AE Indicator
The indicator lights while the AE mode is
in effect.
JAM Indicator
The indicator flashes in response to a jam.
TONER OUT Indicator
The indicator flashes when toner is running
short.
_.
DRUM UNIT Indicator
The indicator flashes to advise replace-
ment of the drum unit.
1 ,
l-6 COPYRIGHT 01988 CANON INC. CANON HP-1010 AEV.G DEC. 1988 PAINTED IN JAPAN [IMPAIME AU JAPONI