Canon NP-1010 Service Manual page 75

11) Remove the two screws, and remove the
rear heater terminal mount.
/'-
C$ Heater terminal mount
@ Screw
Figure 4-66
12) Remove the three stepped screws, and re-
move the grounding plate and outlet guide
plate.
@ Grip stop ring
@ Delivery roller drive gear
Figure 4-67
14) Remove the two screws from the upper
roller bushing mount (front). and remove
the stop ring and then upper roller bushing ,-~
mount.
"(
^'
'(
:
@ Screws (stepped) @ Outlet guide plate
@ Grounding plate
Figure 4-66
13) Remove the grip stop ring, and remove the
delivery roller drive gear.
@ Stop ring
@ Screws
@ Bushing mount __,_
Figure 4-68
4-22
coPYRlGHT
Olsen cllnow INC.
CANON HP-1010 IWO DEC. 1988 PAINTEA IN JAPAW lIMPRIME AU JAPOM