Canon NP-1010 Service Manual page 67

8) Remove the spring from the copier (rear).
3) Remove the two screws, and remove the
blade.
..11...~...
__________. _.
0 Spring
Figure 4-39
Push up the developing assembly release
lever in the direction of the arrow in Figure
4-36, and pull out the developing assem-
bly.
Removing the Blade, Developing Cylin-
der, and Side Seal
Remove the developing assembly from the
copier.
Remove the two screws, and remove the
upper cover.
0
Screws
@I Upper cover
4-14
0
Screws
@ Blade
Figure 4-41
,,-_.
4) Remove the two screws from the develop-
ing cylinder holder.
0
Screw
@I Developing cylinder holder
Figure 4-42
Figure 4-40
.-
CtlPVAI6HT
01960 CANON INC.
CANON NP-1010 AN.0 DEC. 1908 PAINTED IN JAPAN IIMPAIME AU JAPONI