Canon NP-1010 Service Manual page 69

I
3) Mount the developing cylinder and devel-
oping cylinder holder.
4) Insert a gap gauge (TKN-0172) as shown
in Figure 4-48 between both ends of the
developing cylinder and blade.
. Do not leave finger prints or scratches
on the developing cylinder.
5)
6)
7)
Figure 4-48
Push the blade lightly from above, and fix
it with two screws.
Pull out the gap gauge.
Mount the upper cover.
@I
Gap gauge
@ Developing cylinder
4-16
COPVAlGHT 01998 CANON INC.
CANON HP-1010 AN.0 DEC. 1988 PAINTED IN JAPAN IIMPAIME AU JAPON)