Sleep; Configuration Menu - Stanley K1700 Installation And Operating Instructions Manual

9.2.5

Sleep

The "Sleep" menu allows you to setup the time you want the stove to turn off.
Press "set". The display starts to flash. Select the desired time using the "-" and "+" keys. After choosing the time, press "ok" to
confirm. Press "esc" to return to the menu and "+" to go to the configuration menu.
9.3

Configuration menu

To change the configurations of the boiler pellet stove, press "set".
The "Língua" (Language) menu appears allowing you to select the language.
· Language
To select the language, press "set". Using the "+" or "-" keys, select the desired language (Pt – Portuguese; Nl – Dutch; Gr –
Greek; It – Italian; En – English; Fr – French; Es – Spanish; De – German). Press "ok" to confirm.
Press the "+" key to go to the "eco" menu.
· Eco mode
If the stove is equipped with a thermostat that operates exclusively based on the temperature, the "eco mode" can be enabled
to reduce the fuel consumption. In this mode, the stove operates at a set point temperature. The stove always runs at
maximum operating power until it reaches a temperature (1ºC) above the set point temperature. Upon reaching this
temperature, the stove starts operating at minimum operating power for a preset time period. After this time has elapsed, the stove
turns off. It remains off for another preset period of time. When the measured room temperature drops to a preset value, the
stove turns on again at the maximum operating power.
This operation is only available in automatic mode.
To activate the eco mode, press "set". The display starts to flash. Select "On" or "Off" using the "-" and "+" keys. Press "set" to
confirm the selection.
Press "esc" to return to the previous menu and "+" to go to the (Lighting) menu.
MODE
MAN
esc OFF Set
SLEEP
-
MODE
MAN
AUT
esc 22:00 Set
ESC
SLEEP
-
MENU
OFF
OK
+
MENU
ON
OFF
OK
+
19