Mira Platinum Installation And User Manual page 27

c
a
b
Hot
Inlet
Push-fit Isolators
fitted to both Inlets
After installing the valve, check the push-fit connectors are correctly engaged.
a. Ensure every pipe is fully pushed into the internal stop.
b. Pull the pipework to ensure it is retained and locked in place.
c. Ensure every locking ring is fully retracted.
7
Install the power supply unit provided, connecting it to the mains socket in accordance
with the wiring regulations and permanently fix in place using suitable screws.
Connect the power supply cable to the digital mixing valve and ensure it is firmly in place.
Caution! Before any electrical adjustment is attempted, the electricity supply
must be turned off at the mains switch.
Electrical installation may only be carried out by a competent person.
Electrical socket must be easily accessible for maintenance and service.
Cold Inlet
Outlet 2 -
Overhead / Bathfiller
Push-fit connector to the shower outlets
Outlet 1 - Handset
Outlet 2 - Overhead
Cold Inlet
Hot Inlet
Outlet 1 -
Handset
27