Important Safety Information - Mira Platinum Installation And User Manual

Important Safety Information

Products manufactured by Kohler Mira Ltd. are designed to be safe, provided that they are
installed, used and maintained in good working order, in accordance with our instructions
and recommendations. Follow all warnings, cautions and instructions contained in this guide,
and on, or inside the product. Failure to follow the instructions provided with this product
will invalidate the guarantee.
Warning! To reduce the risk of fire, electric shock or injury please read the important
information listed below.
Warning! This appliance contains magnets. Users fitted with a heart pacemaker or
ICD should follow their normal safety precautions for products that contain magnets.
The magnets are located in the User Controller and Cradle. There are no magnets in
the showerhead.
1. Installation of this product must be carried out in accordance
with these instructions by qualified, competent personnel. Read
all instructions before commencing installation.
2. The electrical installation must comply with BS 7671 (commonly
referred to as the IET Wiring Regulations) and all relevant
building regulations, or any particular regulation or practice
specified by the local electricity supply company.
3. The plumbing installation must comply with all national or local
water regulations and all relevant building regulations, or any
particular regulation or practice specified by the local water
supply company.
4. Isolate the electrical and water supplies before commencing
installation.
5. For any copper pipework ensure supplementary bonding is
provided in accordance with the wiring regulations.
6. A 30mA Residual Current Device (RCD) must be included in the
electrical circuit. This may be part of the consumer unit or a
separate unit.
3