Training With Running Dynamics; Tips For Missing Running Dynamics Data; Using The Varia Camera Controls; Inreach Remote - Garmin ENDURO 2 Owner's Manual

Hide thumbs Also See for ENDURO 2:
Table of Contents

Advertisement

a percentage. For example, 53.2 with an arrow
pointing left or right.
Stride length: Stride length is the length of your stride
from one footfall to the next. It is measured in
meters.
Vertical ratio: Vertical ratio is the ratio of vertical
oscillation to stride length. It displays a percentage.
A lower number typically indicates better running
form.

Training with Running Dynamics

Before you can view running dynamics, you must put
on a running dynamics accessory, such as the HRM-Pro
accessory, and pair it with your device (
Wireless Sensors, page 36
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
4 Select the activity settings.
5 Select Data Screens > Add New.
6 Select a running dynamics data screen.
NOTE: The running dynamics screens are not
available for all activities.
Starting an Activity, page 3
7 Go for a run (
8 Select UP or DOWN to open a running dynamics
screen to view your metrics.

Tips for Missing Running Dynamics Data

If running dynamics data does not appear, you can try
these tips.
y Make sure you have a running dynamics accessory,
such as the HRM-Pro accessory. Accessories
with running dynamics have
module.
Pair the running dynamics accessory with your
watch again, according to the instructions.
y If you are using the HRM-Pro accessory, pair it with
your watch using ANT+ technology, rather than
Bluetooth technology.
y If the running dynamics data display shows only
zeros, make sure the accessory is worn right-side
up.
NOTE: Ground contact time and balance appears
only while running. It is not calculated while
walking.

Using the Varia Camera Controls

NOTICE
Some jurisdictions may prohibit or regulate the
recording of video, audio, or photographs, or may
require that all parties have knowledge of the recording
and provide consent. It is your responsibility to
know and follow all laws, regulations, and any other
restrictions in jurisdictions where you plan to use this
device.
Sensors and Accessories
Pairing Your
).
).
on the front of the
Before you can use the Varia camera controls, you
must pair the accessory with your watch (
Wireless Sensors, page 36
1 Add the RCT Camera glance to your watch
(
Glances, page 21
).
2 From the RCT Camera glance, select an option:
• Select to view the camera settings.
• Select
to take a photo.
• Select
to save a clip.

inReach Remote

The inReach remote function allows you to control your
inReach device using your Enduro device. Go to
com.sg/buy
to purchase a compatible inReach device.

Using the inReach Remote

Before you can use the inReach remote function,
you must add the inReach glance to the glance loop
(
Customizing the Glance Loop, page 23
1 Turn on the inReach device.
2 On your Enduro watch, press UP or DOWN from the
watch face to view the inReach glance.
3 Press START to search for your inReach device.
4 Press START to pair your inReach device.
5 Press START, and select an option:
• To send an SOS message, select Initiate SOS.
NOTE: You should only use the SOS function in a
real emergency situation.
• To send a text message, select Messages >
New Message, select the message contacts,
and enter the message text or select a quick text
option.
• To send a preset message, select Send Preset,
and select a message from the list.
• To view the timer and distance traveled during an
activity, select Tracking.

VIRB Remote

The VIRB remote function allows you to control your
VIRB action camera using your device.

Controlling a VIRB Action Camera

Before you can use the VIRB remote function, you must
enable the remote setting on your VIRB camera. See the
VIRB Series Owner's Manual for more information.
1 Turn on your VIRB camera.
2 Pair your VIRB camera with your Enduro watch
Pairing Your Wireless Sensors, page 36
(
The VIRB glance is automatically added to the
glance loop.
3 Press UP or DOWN from the watch face to view the
VIRB glance.
4 If necessary, wait while your watch connects to your
camera.
5 Select an option:
• To record video, select Start Recording.
• The video counter appears on the Enduro screen.
Pairing Your
).
Garmin.
).
).
37

Advertisement

Table of Contents
loading

Table of Contents