Climbing Sports; Recording An Indoor Climbing Activity; Recording A Bouldering Activity; Starting An Expedition - Garmin ENDURO 2 Owner's Manual

( Courses, page 50
• Select Follow Workout to follow a saved workout
Workouts, page 16
(
• Select Set Power to set the target power value.
• Select Set Grade to set the simulated grade
value.
• Select Set Resistance to set the resistance force
applied by the trainer.
6 Press START to start the activity timer.
The trainer increases or decreases resistance
based on the elevation information in the course or
ride.

Climbing Sports

Recording an Indoor Climbing Activity

You can record routes during an indoor climbing
activity. A route is a climbing path along an indoor rock
wall.
1 From the watch face, press START.
2 Select Climb Indoor.
3 Select Yes to record route statistics.
4 Select a grading system.
NOTE: The next time you start an indoor climbing
activity, the device uses this grading system. You
can hold MENU, select the activity settings, and
select Grading System to change the system.
5 Select the difficulty level for the route.
6 Press START.
7 Start your first route.
NOTE: When the route timer is running, the
device automatically locks the buttons to prevent
accidental button presses. You can hold any button
to unlock the watch.
8 When you finish the route, descend to the ground.
The rest timer starts automatically when you are on
the ground.
NOTE: If necessary, you can press LAP to finish the
route.
9 Select an option:
• To save a successful route, select Completed.
• To save an unsuccessful route, select Attempted.
• To delete the route, select Discard.
10 Enter the number of falls for the route.
11 When you are done resting, press LAP and begin
your next route.
12 Repeat this process for each route until your activity
is complete.
13 Press STOP.
14 Select Save.

Recording a Bouldering Activity

You can record routes during a bouldering activity. A
route is a climbing path along a boulder or small rock
formation.
Activities and Apps
).
).
1 From the watch face, press START.
2 Select Bouldering.
3 Select a grading system.
NOTE: The next time you start a bouldering activity,
the watch uses this grading system. You can hold
MENU, select the activity settings, and select
Grading System to change the system.
4 Select the difficulty level for the route.
5 Press START to start the route timer.
6 Start your first route.
7 Press LAP to finish the route.
8 Select an option:
• To save a successful route, select Completed.
• To save an unsuccessful route, select Attempted.
• To delete the route, select Discard.
9 When you are done resting, press LAP to start your
next route.
10 Repeat this process for each route until your activity
is complete.
11 After your last route, press STOP to stop the route
timer.
12 Select Save.

Starting an Expedition

You can use the Expedition app to prolong the battery
life while recording a multi-day activity.
1 From the watch face, press START.
2 Select Expedition.
3 Press START to satrt the activity timer.
The device enters low power mode and collects
GPS track points once an hour. To maximize
battery life, the device turns off all sensors and
accessories, including the connection to your
smartphone.

Recording a Track Point Manually

During an expedition, track points are recorded
automatically based on the selected recording interval.
You can manually record a track point at any time.
1 During an expedition, press START.
2 Select Add Point.

Viewing Track Points

1 During an expedition, press START.
2 Select View Points.
3 Select a track point from the list.
4 Select an option:
• To start navigating to the track point, select Go
To.
• To view detailed information about the track
point, select Details.

Going Fishing

1 From the watch face, press START.
7