Table of Contents
Advertisement
Select to set a countdown timer
Timers
(
Starting the Countdown Timer,
page 2
Select to enable or disable
Touch
touchscreen controls.
Select to open your Garmin Pay
wallet and pay for purchases
Wallet
with your watch (
page 31
Select to enable or disable Wi-Fi
Wi-Fi
communications.
Customizing the Controls Menu
You can add, remove, and change the order of the
shortcut menu options in the controls menu (
page 30
).
1 Hold MENU.
2 Select Appearance > Controls.
3 Select a shortcut to customize.
4 Select an option:
• Select Reorder to change the location of the
shortcut in the controls menu.
• Select Remove to remove the shortcut from the
controls menu.
5 If necessary, select Add New to add an additional
shortcut to the controls menu.
Using the LED Flashlight
WARNING
This device may have a flashlight that can be
programmed to flash at various intervals. Consult your
physician if you have epilepsy or are sensitive to bright
or flashing lights.
Using the flashlight can reduce battery life. You can
reduce the brightness to extend the life of the battery.
1 Hold LIGHT.
2 Select
.
3 If necessary, press START to turn on the flashlight.
4 Select an option:
• To adjust the brightness or color of the flashlight,
press UP or DOWN.
TIP: You can quickly press LIGHT twice to turn
on the flashlight at this setting in the future.
• To program the flashlight to flash in a selected
pattern, hold MENU, select Strobe, select a mode,
and press START.
• To display your emergency contact information
and program the flashlight to flash in a distress
pattern, hold MENU, select Distress Pattern, and
press START.
NOTE: Your emergency contact information
will only appear if it has been configured in the
Garmin Connect app.
Appearance
).
Garmin Pay,
).
Controls,
Garmin Pay
This feature is not available for/in all regions.
The Garmin Pay feature allows you to use your watch to
pay for purchases in participating locations using credit
or debit cards from a participating financial institution.
Setting Up Your Garmin Pay Wallet
You can add one or more participating credit or debit
cards to your Garmin Pay wallet. Go to Garmin.com.sg/
garmin-pay to find participating financial institutions.
®
1 From the Garmin Connect app, select
2 Select Garmin Pay > Get Started.
3 Follow the on-screen instructions.
Paying for a Purchase Using Your Watch
Before you can use your watch to pay for purchases,
you must set up at least one payment card.
You can use your watch to pay for purchases in a
participating location.
1 Hold LIGHT.
2 Select
.
3 Enter your four-digit passcode.
NOTE: If you enter your passcode incorrectly three
times, your wallet locks, and you must reset your
passcode in the Garmin Connect app.
Your most recently used payment card appears.
4 If you have added multiple cards to your Garmin Pay
wallet, swipe to change to another card (optional).
5 If you have added multiple cards to your Garmin
Pay wallet, select DOWN to change to another card
(optional).
Within 60 seconds, hold your watch near the
payment reader, with the watch facing the reader.
6 The watch vibrates and displays a check mark when
it is finished communicating with the reader.
7 If necessary, follow the instructions on the card
reader to complete the transaction.
TIP: After you successfully enter your passcode,
you can make payments without a passcode for 24
hours while you continue to wear your watch. If you
remove the watch from your wrist or disable heart rate
monitoring, you must enter the passcode again before
making a payment.
Adding a Card to Your Garmin Pay Wallet
You can add up to 10 credit or debit cards to your
Garmin Pay wallet.
1 From the Garmin Connect app, select
2 Select Garmin Pay > > Add Card.
3 Follow the on-screen instructions.
After the card is added, you can select the card on your
watch when you make a payment.
NOTICE
or
or
.
.
31
Advertisement
Table of Contents
