Editing An Alarm; Starting The Countdown Timer; Deleting A Timer; Using The Stopwatch - Garmin ENDURO 2 Owner's Manual

Editing an Alarm

1 From the watch face, hold MENU.
2 Select Clocks > ALARMS > Edit.
3 Select an alarm.
4 Select an option:
• To turn the alarm on or off, select Status.
• To change the alarm time, select Time.
• To set the alarm to repeat regularly, select
Repeat, and select when the alarm should repeat.
• To select the type of alarm notification, select
Sound and Vibe.
• To turn the backlight on or off with the alarm,
select Backlight.
• To select a description for the alarm, select
Label.
• To delete the alarm, select Delete.

Starting the Countdown Timer

1 From the watch face, hold MENU.
2 Select Clocks > TIMERS.
3 Select an option:
• To set and save a countdown timer for the first
time, enter the time, press MENU, and select
Save Timer.
• To set and save additional countdown timers,
select Add Timer, and enter the time.
• To set a countdown timer without saving it,
select Quick Timer, and enter the time.
4 If necessary, press MENU, and select an option:
• Select Time to change the time.
• Select Restart > On to automatically restart the
timer after it expires.
• Select Sound and Vibe, and select a type of
notification.
5 Press START to start the timer.

Deleting a Timer

1 From the watch face, hold MENU.
2 Select Clocks > TIMERS > Edit.
3 Select a timer.
4 Select Delete.

Using the Stopwatch

1 From the watch face, hold MENU.
2 Select Clocks > STOPWATCH.
3 Press START to start the timer.
4 Press LAP to restart the lap timer
2

Adding Alternate Time Zones

You can display the current time of day in additional
time zones on the alternate time zones glance. You can
add up to four alternate time zones.
NOTE: You may need to add the alternate time zones
glance to the glance loop (
Loop, page 23

Editing an Alternate Time Zone

.
1
The total stopwatch time
5 Press STOP to stop both timers.
6 Select an option:
• To reset both timers, press DOWN.
• To save the stopwatch time as an activity, press
MENU, and select Save Activity.
• To reset the timers and exit the stopwatch, press
MENU, and select Done.
• To review the lap timers, press MENU, and select
Review.
NOTE: The Review option only appears if there
have been multiple laps.
• To return to the watch face without resetting the
timers, press MENU, and select Go to Watchface.
• To enable or disable lap recording, press MENU,
and select Lap Key.
).
1 From the watch face, hold MENU.
2 Select Clocks > ALT� TIME ZONES > Add Alt� Time
Zone.
3 Select a time zone.
4 If necessary, rename the zone.
1 From the watch face, hold MENU.
2 Select Clocks > ALT� TIME ZONES > Edit.
3 Select a time zone.
4 Select an option:
• To enter a custom name for the time zone, select
Rename Zone.
• To change the time zone, select Change Zone.
• To change the location of the time zone in the
glance, select Reorder Zone.
• To delete the time zone, select Delete Zone.
continues running.
2
Customizing the Glance
Clocks