Table of Contents
Advertisement
1 During an activity, press STOP.
2 Select Back to Start, and select an option:
• To navigate back to the starting point of your
activity along the path you traveled, select
TracBack.
• If you do not have a supported map or are using
direct routing, select Route to navigate back to
the starting point of your activity in a straight line.
• If you are not using direct routing, select Route to
navigate back to the starting point of your activity
using turn-by-turn directions.
Your current location
your destination
appear on the map.
3
Viewing Route Directions
You can view a list of turn-by-turn directions for your
route.
1 While navigating a route, hold MENU.
2 Select Turn By Turn.
A list of turn-by-turn directions appears.
3 Press DOWN to view additional directions.
Navigating with Sight 'N Go
You can point the device at an object in the distance,
such as a water tower, lock in the direction, and then
navigate to the object.
1 From the watch face, press START.
2 Select an activity.
3 Hold MENU.
4 Select Navigation > Sight 'N Go.
5 Point the top of the watch at an object, and press
START.
Navigation information appears.
6 Press START to begin navigation.
Marking and Starting Navigation to a Man
Overboard Location
You can save a man overboard (MOB) location, and
automatically start navigation back to it.
TIP: You can customize the hold function of the keys to
access the MOB function (
page 54
).
1 From the watch face, press START.
2 Select an activity.
50
, the track to follow
, and
1
2
Customizing the Hot Keys,
3 Hold MENU.
4 Select Navigation > Last MOB.
Navigation information appears.
Stopping Navigation
1 During an activity, hold MENU.
2 Select Stop Navigation.
Courses
You can send a course from your Garmin Connect
account to your device. After it is saved to your device,
you can navigate the course on your device.
You can follow a saved course simply because it is a
good route. For example, you can save and follow a
bike friendly commute to work.
You can also follow a saved course, trying to match or
exceed previously set performance goals. For example,
if the original course was completed in 30 minutes, you
can race against a Virtual Partner trying to complete
the course in under 30 minutes.
Creating and Following a Course on Your Device
1 From the watch face, press START.
2 Select an activity.
3 Hold MENU.
4 Select Navigation > Courses > Create New.
5 Enter a name for the course, and select
6 Select Add Location.
7 Select an option.
8 If necessary, repeat steps 6 and 7.
9 Select Done > Do Course.
Navigation information appears.
10 Press START to begin navigation.
Creating a Round-Trip Course
The device can create a round-trip course based on a
specified distance and direction of navigation.
1 From the watch face, press START.
2 Select Run or Bike.
3 Hold MENU.
4 Select Navigation > Round-Trip Course.
5 Enter the total distance for the course.
6 Select a direction heading.
The device creates up to three courses. You can
press DOWN to view the courses.
7 Press START to select a course.
8 Select an option:
• To begin navigation, select Go.
• To view the course on the map and pan or zoom
the map, select Map.
• To view a list of turns in the course, select Turn
By Turn.
• To view an elevation plot of the course, select
.
Navigation
Advertisement
Table of Contents
