Enabling Auto Climb; Satellite Settings; Training; Workouts - Garmin ENDURO 2 Owner's Manual

5 Select ClimbPro > Status > When Navigating.
6 Select an option:
• Select Data Field to customize the data field that
appears on the ClimbPro screen.
• Select Alert to set alerts at the start of a climb or
at a certain distance from the climb.
• Select Descents to turn descents on or off for
running activities.
• Select Climb Detection to choose the types of
climbs detected during cycling activities.
7 Review the climbs and course details for the course
Viewing or Editing Course Details, page 51
(
8 Start following a saved course (
Destination, page 49

Enabling Auto Climb

You can use the auto climb feature to detect elevation
changes automatically. You can use it during activities
such as climbing, hiking, running, or biking.
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Climb > Status.
6 Select Always or When Not Navigating.
7 Select an option:
• Select Run Screen to identify which data screen
appears while running.
• Select Climb Screen to identify which data
screen appears while climbing.
• Select Invert Colors to reverse the display colors
when changing modes.
• Select Vertical Speed to set the rate of ascent
over time.
• Select Mode Switch to set how quickly the device
changes modes.
NOTE: The Current Screen option allows you to
automatically switch to the last screen you were
viewing before the auto climb transition occurred.

Satellite Settings

You can change the satellite settings to customize
the satellite systems used for each activity. For more
information about satellite systems, go to
sg/about-gps .
Hold MENU, select Activities & Apps, select an activity,
select the activity settings, and select Satellites.
NOTE: This feature is not available for all activities.
Off: Disables satellite systems for the activity.
Use Default: Enables the watch to use the default
system setting for satellites (
page 52
).
GPS Only: Enables the GPS satellite system.
16
).
Navigating to a
).
Garmin.com.
System Settings,
All Systems: Enables multiple satellite systems. Using
multiple satellite systems together offers increased
performance in challenging environments and
faster position acquisition than using GPS only.
However, using multiple systems can reduce
battery life more quickly than using GPS only.
All + Multi-Band: Enables multiple satellite systems
on multiple frequency bands. Multi-band systems
use multiple frequency bands and allow for more
consistent track logs, improved positioning,
improved multi- path errors, and fewer atmospheric
errors when using the watch in challenging
environments.
AutoSelect : Enables the watch to dynamically
select the best satellite system based on your
environment. The AutoSelect setting offers
increased performance while still prioritizing battery
life.
UltraTrac: Records track points and sensor data less
frequently. Enabling the UltraTrac feature increases
battery life but decreases the quality of recorded
activities. You should use the UltraTrac feature
for activities that demand longer battery life and
for which frequent sensor data updates are less
important.

Training

Workouts

You can create custom workouts that include goals
for each workout step and for varied distances,
times, and calories. During your activity, you can view
workout-specific data screens that contain workout
step information, such as the workout step distance or
average step pace.
You can create and find more workouts using Garmin
Connect, or select a training plan that has built-in
workouts and transfer them to your watch.
You can schedule workouts using Garmin Connect. You
can plan workouts in advance and store them on your
watch.

Following a Workout From Garmin Connect

Before you can download a workout from Garmin
Connect, you must have a Garmin Connect account
( Garmin Connect, page 43
1 Select an option:
• Open the Garmin Connect app.
• Go to connect.Garmin.com
2 Select Training > Workouts.
3 Find a workout, or create and save a new workout.
4 Select or Send to Device.
5 Follow the on-screen instructions.
).
.
Training