Table of Contents
Advertisement
back on again.
y Enable Bluetooth technology on your phone.
y Update the Garmin Connect app to the latest
version.
y Remove your watch from the Garmin Connect app
and the Bluetooth settings on your phone to retry
the pairing process.
y If you bought a new phone, remove your watch from
the Garmin Connect app on the phone you intend to
stop using.
y Bring your phone within 10 m (33 ft.) of the watch.
y On your phone, open the Garmin Connect app,
select
or
, and select Garmin Devices > Add
Device to enter pairing mode.
y From the watch face, hold MENU, and select
Connectivity > Phone > Pair Phone.
Can I use my Bluetooth sensor with my
watch?
The watch is compatible with some Bluetooth sensors.
The first time you connect a sensor to your Garmin
watch, you must pair the watch and sensor. After
they are paired, the watch connects to the sensor
automatically when you start an activity and the sensor
is active and within range.
1 Hold MENU.
2 Select Sensors & Accessories > Add New.
3 Select an option:
• Select Search All Sensors.
• Select your sensor type.
You can customize the optional data fields
(
Customizing the Data Screens, page 12
My headphones will not connect to the watch
If your Bluetooth headphones were previously
connected to your phone, they may connect to your
phone automatically instead of connecting to your
watch. You can try these tips.
y Turn off Bluetooth technology on your phone.
Refer to the owner's manual for your phone for
more information.
y Stay 10 m (33 ft.) away from your phone while
connecting your headphones to your watch.
y Pair your headphones with your watch (
Bluetooth Headphones, page 41
My music cuts out or my headphones won't
stay connected
When using a Enduro watch connected to Bluetooth
headphones, the signal is strongest when there is a
direct line of sight between the watch and the antenna
on the headphones.
y If the signal passes through your body, you may
experience signal loss or your headphones may
Troubleshooting
).
Connecting
).
become disconnected.
y If you wear your Enduro watch on your left wrist,
you should make sure the headphone's Bluetooth
antenna is on your left ear.
y Since headphones vary by model, you can try
wearing the watch on your other wrist.
y If you are using metal or leather watch bands, you
can switch to silicone watch bands to improve
signal strength.
Restarting Your Watch
1 Hold LIGHT until the watch turns off.
2 Hold LIGHT to turn on the watch.
Resetting All Default Settings
Before you reset all default settings, you should sync
the watch with the Garmin Connect app to upload your
activity data.
You can reset all of the watch settings to the factory
default values.
1 From the watch face, hold MENU.
2 Select System > Reset.
3 Select an option:
• To reset all of the watch settings to the factory
default values and save all user-entered
information and activity history, select Reset
Default Settings.
• To delete all activities from the history, select
Delete All Activities.
• To reset all distance and time totals, select Reset
Totals.
• To reset all of the watch settings to the factory
default values and delete all user-entered
information and activity history, select Delete
Data and Reset Settings.
NOTE: If you have set up a Garmin Pay wallet,
this option deletes the wallet from your watch. If
you have music stored on your watch, this option
deletes your stored music.
Tips for Maximizing the Battery Life
To extend the life of the battery, you can try these tips.
y Change the power mode during an activity
Changing the Power Mode, page 52
(
y Turn on the battery saver feature from the controls
menu (
Controls, page 30
y Reduce the screen timeout (
Settings, page 53
).
y Reduce the screen brightness (
Settings, page 53
).
y Use UltraTrac satellite mode for your activity
(
Satellite Settings, page 16
y Turn off Bluetooth technology when you are not
using connected features (
y When pausing your activity for a longer period of
).
).
Changing the Screen
Changing the Screen
).
Controls, page 30
).
57
Advertisement
Table of Contents
