19.4.22 Working On The Camshaft Bearing Bridge - KTM 790 Adventure R 2019 Repair Manual

- Check slide rail
Q)
for damage and wear.
• If there is damage or wear:
- Change slide rail.
- Check t im ing chain sprocket
@
for damage and wear.
»
If there is damage or wear:
- Change the crankshaft.
- Check balancer shaft bearing
Cs)
for damage and wear.
• If there is damage or wear:
- Change the balancer bearing.
19.4.22 Working on the camshaft bearing bridge
0
01
I
(D
B06030- 10
llUb031- lU
0
10
I
(D
B06032- 10
- Remove O-rings
O.
- Remove screws
8 .
- Take off slide rail
@).
- Pull out spindle
C,
of the balancer shaft with appropriate
screw MIO.
Remove balancer shaft with needle bearings
0
and wash-
ers
Q).
ENGINE 19
301