7.22.19 Abs - KTM 1290 SUPER ADVENTURE R 2017 Owner's Manual

7 COMBINATION INSTRUMENT

7.22.19 ABS

Condition
• The motorcycle is stationary.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Motorcycle is marked. Press the SET button to open
the menu.
Warning
Voiding of the government approval for road use and the insurance coverage If
the ABS is switched off completely, the vehicle's approval for road use is invali-
dated.
F00942-01
–
–
Press the UP or DOWN button until ABS is marked. Press the SET button to open the
menu.
–
Activate the menu item using the UP or DOWN button.
–
Press the ABS button to switch off SET or to select between ABS modes.
Info
The ABS can only be reactivated by switching on the ignition again.
When the Road ABS mode is enabled, ABS controls both wheels.
When the Offroad ABS mode is enabled, ABS only controls the front wheel. The
rear wheel is not controlled by ABS and may lock during braking maneuvers.
Press and hold the
SET button for 3-5
seconds.
Only operate the vehicle in closed-off areas remote from public road traffic if
the ABS is switched off completely.
Activation of the different ABS modes.
78