KTM 790 Adventure R 2019 Repair Manual page 166

14 WHEELS
164
- Remove spacer washer
@).
- Remove spacing tube
C,.
- Remove spacer @) .
- Remove shaft seal ring
0 .
Remove lock ring
f) .
Using a suitable tool, press bearing
@
out from the inside to
the outside.
- Press the new bearing all the way in from the outside to the
inside.
• Info
I
Only press the bearing in via, the outer bearing race;
otherwise the bearing will be damaged when it is
pressed in.
- Mount t he lock ring.
✓
The lock ring engages audi bly.
- Grease new shaft seal ring and press it in until it is flush.
I
Long- life grease(~ p. 466)
- Clean and grease the contact surfaces
f)
of the spacer.
I
Long-I ife grease (~ p. 466)
- Position spacer @) .