KTM 790 Adventure R 2019 Repair Manual page 275

19.3.22 Removing the cylinder head
- Loosen and remove screws
O
from the outside to the inside.
- Take off camshaft bearing bri dge with balancer shaft.
- Raise the camshafts at the rear and take the tim ing chain off
the rear sproclket. Remove the camshafts.
- Remove screw
O
wit h gasket.
- Remove screws
8 .
- Loosen screws
8
in a crisscross pattern and remove them
with the washers.
Take off the cylinder head.
ENGINE 19
273