Installing The Clutch Discs - KTM 790 Adventure R 2019 Repair Manual

19 ENGINE
19.5.17 Installing the clutch discs
800949·10
340
- Mount washer @ and inner clutch hub @) .
- Mount nut @)
with
the washer.
Use a special tool to hold the inner clut ch hub @) and tighten
the nut @) .
Guideline
Nut, inner
clutch hub
M20xl.5 90 Nm (66.4 lbf
ft)
Loctite®243™
I
Holding wrench (51129003000) C • p. 470)
- Mount support ring
O
and pretens ion ring
8 .
✓
The pretension ring rests against the support ring on the
inside and the outside faces away from the support ring.
- Thoroughly oil the c lutch fac ing discs.
- Mount a clutch f acing disc
8
with a larger inside diameter.
41
- Alternately mount 6 intermed iate c l utch discs
C,
and 5 of the
same clutch facing discs
0 .
- Alternately mount 2 clutch facing discs
8
and an intermedi-
ate clutch disc
0
with a larger inside diameter.
- The outer c lutch facing disc must be mounted offset by one
mesh.
- Position c lutch pressure cap @ .
✓
The gear teeth of the outer intermed iate c lutch disc
engage in the clut ch pressure cap.
✓ The clutch pressure cap rests flush against the outer
clutch facing disc.