Removing The Motorcyc Le From Th E Stand At The Rear; Raising The Motorcycle At T He Front Using The Work Stand - KTM 790 Adventure R 2019 Repair Manual

5 MOTORCYCLE
- Mount special tool
8 .
I
Work stand attachment s
(75029036000) (
1
p.
478)
- Repeat these steps on the opposite side.
- Mount special tool
@).
I
Work stand
(62529055200) (
p.
475)
- Posit ion motorcycle upright, align special tool , and raise
motorcyc le.
5.6 Removing the motorcycle from the work stand at the rear
Note
Danger of damage
The parked veh icle can rol I away or fall over.
- Park the vehicle on a f irm and level surface.
Main work
- Secure the mot orcycle against fall ing over.
- Remove special tool
O
and
8 .
Work stand (62529055200) ( p. 475)
Work stand attachment s
(75029036000)
(!J!i
p. 4 78)
- Position footrest rubber with holder.
- Mount and tighten nut
8 .
Guideline
Remaining nuts,
chassis
M6
- Repeat these st eps on the opposite side.
Finishing work
- Install the main silencer. ( p.
100)
5.7 Raisin1 the motorcycle at the front usin1 the work stand
Note
Danger of damage The parked vehicle can rol I away or f all over.
- Park the vehicle on a f irm and level surface.
Preparatory work
- Remove the seat. (~ p.
114)
- Remove the left side cover. (r. p.
130)
- Remove the battery cover. (~ p. 131)
- Remove left fuel tank spoiler. (,;! p. 132)
- Remove the right side cover. (i p.
130)
16
10
Nm
(7.4
lbf ft)
41