Replacing The Turn Signal Lights; Troubleshooting - KEEWAY K-LIGHT 125 Owner's Manual And Warranty

Periodic maintenance and adjustment

Replacing the turn signal lights

EN
1. Install the re ector lens with the
screws (A).
6
2. Remove the burnt bulb by pressing it
and rotating counter-clockwise.
3. Insert a new bulb in the holder, press it
and rotate clockwise until it stops.
A
4. Install the re ector lens with the
screws (A).

Troubleshooting

Although Keeway motorcycles receive a
thorough inspection before shipment from
the factory, trouble may occur during op-
eration.
Any problem in the fuel, compression, or
ignition systems, for example, can cause
poor starting and loss of power.
The following troubleshooting charts
represent quick and easy procedures for
checking these vital systems yourself.
However, should your motorcycle require
any repair, take it to a Keeway dealer,
whose skilled technicians have the neces-
sary tools, experience, and know-how to
service the motorcycle properly.
Use only original Keeway spare parts.
Non-original spare parts may look like Kee-
way spare parts, but they are often inferior
in quality, have a shorter service life and
can lead to expensive repair bills.
6-34