Air lter element
The air lter element must be replaced at
the intervals speci ed in the periodic main-
tenance and lubrication chart.
Replacing the air lter element
1.
Place the vehicle on a at surface and
keep it upright.
2.
Remove the seat (3-12).
3.
Remove the air lter cover with the rel-
evant screws.
4.
Pull the air lter element out and the
two corresponding meshes.
5.
Replace the air lter with a new one.
6.
Insert a new air lter element into the
air lter case following the disassembly
sequence.
6-15
Periodic maintenance and adjustment
7.
Install the air lter case cover by install-
ing the screws.
Checking the engine idling speed
Check the engine idling speed and, if nec-
essary, have it corrected by a Keeway deal-
er.
Engine idling speed:
1400-1600 rpm
EN
6