Checking The Brake Lever Clearance; Brake Light Switches - KEEWAY K-LIGHT 125 Owner's Manual And Warranty

Check the clutch lever clearance regularly
and adjust as necessary.
1. Loosen the adjusting nut (C) and the
adjusting locknut (B) on the clutch
screw cable (A) at the same time.
2. To increase clutch lever clearance, turn
the adjusting nut clockwise.
To reduce clutch lever clearance, turn
the adjusting nut counter-clockwise.
3. After adjusting, tighten the locknut.
A
B
A. Clutch screw
B. Adjustment locknut
C. Adjusting nut
TIP
If the speci ed clearance cannot be ob-
tained as described above or if the clutch
does not operate correctly, have a Keeway
dealer check the internal clutch mecha-
nism.

Checking the brake lever clearance

There should be no clearance at the brake
lever end. If there is clearance, have a Kee-
way dealer inspect the brake system.
C
Periodic maintenance and adjustment
A soft or spongy feeling in the brake
lever can indicate the presence of air
in the hydraulic system. If there is air
in the hydraulic system, have a Kee-
way dealer bleed the system before
operating the vehicle.
Air in the hydraulic system will di-
minish the braking performance,
which may result in loss of control
and an accident.

Brake light switches

The brake light, which is activated by the
rear brake pedal and front brake lever,
should come on just before braking takes
e ect. If necessary, have a Keeway dealer
adjust the brake light switches.
6-19
WARNING
EN
6