Jeep Wrangler Owner's Manual page 137

136 MULTIMEDIA
Safety & Driving Assistance
When the Safety & Driving Assistance button is selected on the touchscreen, the system displays the options related to the vehicle's safety settings. These options will differ
depending on the features equipped on the vehicle. The settings may display in list form or within subfolders on the screen. To access a subfolder, select the desired folder; the
available options related to that feature will then display on the screen.
NOTE:
Depending on the vehicle's options, feature settings may vary.
Forward Collision Warning Sensitivity — Located In Automatic Emergency Braking
Forward Collision Warning — Located In Automatic Emergency Braking Submenu
Front ParkSense Volume
Rear ParkSense Volume
Setting Name
Submenu
ParkSense
This setting will change the distance at which the Forward Collision Warning (FCW) alert
sounds. The "Medium" setting will have the FCW system signal when an object is in view,
and the possibility of a collision is detected. The "Near" setting will have the FCW system
signal when the object is closer to the vehicle. The "Far" setting will have the FCW system
signal when an object is at a far distance from the vehicle.
This setting will turn the Forward Collision Warning system on or off. The "Off" setting will
deactivate the FCW system. The "Warning Only" setting will provide only an audible chime
when a collision is detected. The "Warning + Active Braking" setting will provide an
audible chime and apply some brake pressure when a collision is detected.
This setting will change the type of ParkSense alert when a close object is detected and
can provide both an audible chime and a visual display.
This setting adjusts the volume of the Front ParkSense system. The available settings are
"Low", "Medium", and "High".
This setting adjusts the volume of the Rear ParkSense system. The available settings are
"Low", "Medium", and "High".
Description