60/40 Split Folding Rear Seat - Jeep Wrangler Owner's Manual

Manual Seat Height Adjustment
The driver's seat height can be raised or lowered by using
the ratcheting handle, located on the outboard side of the
seat. Pull upward on the handle to raise the seat, push
downward on the handle to lower the seat. Several strokes
may be necessary to achieve the desired position.
Seat Height Adjustment
Manual Front Seat Recline Adjustment
To recline the seat, pull on the recline strap and lean
forward or backward, depending on the direction you
would like the seatback to move. Release the strap when
the desired position is reached and the seatback will lock
into place.
Recline Strap
WARNING!
Do not ride with the seatback reclined so that the
shoulder belt is no longer resting against your chest. In
a collision you could slide under the seat belt, which
could result in serious injury or death.
Lumbar Support
The lumbar control knob is located on the outboard side of
the front driver seat. Rotate the control forward to
increase and rearward to decrease the desired amount of
lumbar support.
GETTING TO KNOW YOUR VEHICLE
Lumbar Control Knob
60/40 S F R
PLIT OLDING
To provide additional storage area, each rear seat can be
folded flat to allow for extended cargo space.
NOTE:
 Be sure that the front seats are fully upright and posi-
tioned forward. This will allow the rear seat to fold down
easily.
 The center head restraints must be in the lowest posi-
tion to avoid contact with the center console when
folding the seat.
37
S
EAR EAT