Jeep Wrangler Owner's Manual page 78

ACC SET
When ACC is set, the set speed will display in the
instrument cluster.
The ACC screen may display once again if any ACC activity
occurs, which may include any of the following:
 System Cancel
 Driver Override
 System Off
 ACC Proximity Warning
 ACC Unavailable Warning
NOTE:
The instrument cluster display will return to the last
display selected after five seconds of no ACC display
activity .
Fuel Economy
Push and release the up or down
the Fuel Economy icon is highlighted in the instrument
cluster display. Push and hold the OK button to reset
average fuel economy feature.
Toggle left or right arrow button to select a display
with or without Current Fuel Economy Information.
 Range – The display shows the estimated distance (mi
or km) that can be traveled with the fuel remaining in
the tank. When the Range value is less than 10 miles
(16 kilometers), the Range display will change to a
"LOW" message. Adding a significant amount of fuel to
the vehicle will turn off the "LOW" message and a new
Range value will display. Range cannot be reset
through the OK button.
NOTE:
Significant changes in driving style or vehicle loading will
greatly affect the actual drivable distance of the vehicle,
regardless of the Range displayed value.
 Average – The display shows the average fuel economy
(MPG, L/100 km, or km/L) since the last reset.
 Current – This display shows the current fuel economy
(MPG, L/100 km, km/L) while driving.
Trip Info
Push and release the up
the Trip icon/title is highlighted in the instrument cluster
arrow button until
display, then push and release the left
arrow button to select Trip A or Trip B.
The Trip A and Trip B information will display the following:
 Distance
 Average Fuel Economy
 Elapsed Time
Hold the OK button to reset all the information.
GETTING TO KNOW YOUR INSTRUMENT PANEL
Stop/Start — If Equipped
Push and release the up
the Stop/Start icon/title is highlighted in the instrument
cluster display. The screen will display the Stop/Start
status.
Audio
Push and release the up
the Audio Menu icon/title is highlighted in the instrument
cluster display. This menu will display the audio source
information, including the Song name, Artist name, and
audio source with an accompanying graphic.
Messages
Push and release the up
the Messages Menu item is highlighted. This feature
or down arrow button until
shows the number of stored warning messages. Pushing
the right
or right
stored messages are.
When no messages are present, a "No Stored Messages"
will display.
or down arrow button until
or down arrow button until
or down arrow button until
arrow button will allow you to see what the
77