Jeep Wrangler Owner's Manual page 273

272 SERVICING AND MAINTENANCE
3. Remove the carpet under the load floor and the side
support and then pull the carpet out.
Rear Load Floor
1 — Side Supports
2 — Load Floor
4. When reinstalling carpet please perform these steps
in reverse order making sure that the carpet is tucked
under the scuffs, B-pillar, console, and refasten
grommets.
Cargo Carpet (Four-Door Models) With Gap Hider:
1. Remove the grommets under the rear seat (one left
and one right).
2. Pull the carpet out to the front and open the carpet
split around the seat belt attachment and under the
center seat bracket.
Under Rear Seat
1 — Grommets
2 — Carpet Split
3. When reinstalling carpet please perform these steps
in reverse order making sure that the carpet is tucked
under the scuffs, B-pillar, console, and refasten
grommets.
Side Carpet (Four-Door Models):
1. Remove the side grommet (one left and one right).
2. Pull the carpet out starting on the top flange, then all
around the perimeter and open the carpet split
around the seat belt attachment.
Inside Sidewall
1 — Top Flange
2 — Grommet
3 — Side Carpet
3. When reinstalling carpet please perform these steps
in reverse order making sure that the carpet is tucked
under the scuffs, B-pillar, console, and refasten
grommets.