Jeep Wrangler Owner's Manual page 30

NOTE:
Do not pry back to open, as this will break the plastic
cover.
Wiring Access Door
4. Pull up on the red locking tab to unlock the wiring
harness.
Closed Wiring Harness
1 – Red Locking Tab
2 – Wiring Harness Lever (Closed Position)
5. Push and hold down the black security tab under the
wiring harness, and lift the harness into the open
position.
GETTING TO KNOW YOUR VEHICLE
Open Wiring Harness
1 – Wiring Harness Lever (Open Position)
2 – Black Security Tab
6. With the wiring harness open, pull straight downward
on the wiring connector to unplug. Store the wiring
connector in the lower door basket.
7. With the door in the open position, remove the check
screw from the door check attachment on the
bodyside (using a #T40 Torx head driver).
29