Jeep Wrangler Owner's Manual page 84

recommended to take the vehicle to an authorized dealer
as soon as possible.
Do not operate the vehicle until the cause is corrected.
This light does not indicate how much oil is in the engine.
The engine oil level must be checked under the hood.
Oil Temperature Warning Light
This warning light will illuminate to indicate
the engine oil temperature is high. If the light
turns on while driving, stop the vehicle and
shut off the engine as soon as possible. Wait
for oil temperature to return to normal levels.
Seat Belt Reminder Warning Light
This warning light indicates when the driver or
passenger seat belt is unbuckled. When the
ignition is first placed in the ON/RUN or ACC/
ON/RUN position and if the driver's seat belt is
unbuckled, a chime will sound and the light
will turn on. When driving, if the driver or front passenger
seat belt remains unbuckled, the Seat Belt Reminder Light
will flash or remain on continuously and a chime will sound
page 171.
Ú
Speed Warning Light— If Equipped
This warning light alerts the driver when the vehicle speed
is greater than the specified limits with an audible
warning.
Audible warning frequency:
Speeds above 80 km/h (49 mph) -
1 cycle / 2 minute (primary level).
Speeds above 75 mph (120 km/h) -
1 cycle / 2 sec (secondary level).
NOTE:
The Speed Warning Light cannot be stopped
by means other than control of the speed by the driver.
Transmission Temperature Warning Light
This warning light will illuminate to warn of a
high transmission fluid temperature. This may
occur with strenuous usage such as trailer
towing. If this light turns on, stop the vehicle
and run the engine at idle or slightly faster,
with the transmission in PARK (P) or NEUTRAL (N), until the
light turns off. Once the light turns off, you may continue to
drive normally.
GETTING TO KNOW YOUR INSTRUMENT PANEL
WARNING!
If you continue operating the vehicle when the
Transmission Temperature Warning Light is illuminated
you could cause the fluid to boil over, come in contact
with hot engine or exhaust components and cause a
fire. If you continue to operate the vehicle when the
"CLUTCH HOT" message is displayed, or the
Transmission Temperature Warning Light is illuminated,
you could cause the clutch to overheat and cause a fire.
CAUTION!
Continuous driving with the Transmission Temperature
Warning Light illuminated will eventually cause severe
transmission damage or transmission failure. If you
continue to operate the vehicle when the "CLUTCH
HOT" message is displayed, or the Transmission
Temperate Warning Light is illuminated, you could
cause the clutch to overhead and cause several clutch
damage, transmission damage, or failure.
83