68
GETTING TO KNOW YOUR VEHICLE
5.
Reinstall the protective caps over the wiper arm hex
bolts and push gently until they snap into place.
Step Five
1 — Hex Bolt Cover Installed
2 — Hex Bolt Cover Removed
6.
After completing the steps above, reinstall the
Freedom Top panels.
HOOD
O
T
H
PENING
HE
OOD
Release both of the outside hood latches.
Hood Latch Locations
Raise the hood slightly, and place a hand palm-side down
in the center of the hood opening. Locate the safety latch
in the middle, and push the latch to the right to open.
Place Hand In Hood Opening