Jeep Wrangler Owner's Manual page 142

AUX Switches
When the AUX Switches button is pressed on the touchscreen, the system displays the options related to the four vehicle AUX switches.
NOTE:
Depending on the vehicle's options, feature settings may vary.
Key Off Options
After pressing the Key Off Options button on the touchscreen, the following settings will be available:
NOTE:
Depending on the vehicle's options, feature settings may vary.
Doors On Key Off Power Delay
Setting Name
AUX 1-4
Setting Name
This setting will adjust the type and power source for the four vehicle AUX switches. There are
two types: "Latching" and "Momentary". The power source for the AUX switches can either be
set to run off the "Battery" or from the "Ignition". In addition to setting the type and power
source, you can set if the vehicle will recall the previous state at which the AUX switches were
set. The Recalled Last State setting can be set to "On" or "Off". Last state conditions are met
only if the type is set to Latching and the power source is set to Ignition.
This setting will keep certain electrical features running after the engine is turned on.
When any door is opened, the electronics will deactivate. The available settings are "0
sec", "45 sec", "5 min", and "10 min".
MULTIMEDIA
Description
Description
141