Jeep Wrangler Owner's Manual page 271

270 SERVICING AND MAINTENANCE
5. Finally open the carpet split around seat bracket and
then remove the last two grommets.
Front Seat And Floor
1 — Grommets
6. When reinstalling carpet please perform these steps
in reverse order making sure that the carpet is tucked
under the scuffs, B-pillar, console, and refasten
grommets.
Rear Carpet (Four-Door Models):
1. Remove the grommets under the front seat (one left
and one right).
2. Then pull the carpet out, to the rear and open the
carpet split around the front seat brackets.
Pull Toward The Rear Of Vehicle
1 — Carpet Split
2 — Rear Carpet
3. Remove the grommets under the rear seat (one left
and one right). First the grommet for the cargo carpet
and then the rear carpet.
4. Pull the carpet out to the front and open the carpet
split around the rear seat brackets.
Under Rear Seat
1 — Carpet Split
5. When reinstalling carpet please perform these steps
in reverse order making sure that the carpet is tucked
under the scuffs, B-pillar, console, and refasten
grommets.