Fostex G24S Owner's Manual page 34

his function displays, on the MEMORY display, the present value in the locate memory. As the locate
memory is used for storing the time data for the location point of the last locate operation, it is separate
from the cue memory, (and is automatically rewritten with the new value each time " locate" is carried
out).
When locating to the same position as the previous locate operation, it is only necessary to directly press
the LOCA E key without recalling the cue memory.
• Methods of Location Assignment
(a) Entering by use of numerical keypad .. CLR -> 0-9
(b) Recalling of cue memory .......... RCL -»0-9 S O -» LOCA E
(c) Operating by use of HOLD key ...... PLAY mode » HOLD
J
• he Method for Dlsplaying/Changing Locate Memory
(a) When the RCL key and LOCA E key are » 7
pressed in order, any values presently stored H
in the locate memory will be shown on the V
MEMORY display.
(b) After this value is rewritten and the S O key
and LOCA E key are pressed in order, the
new time data will be registered in the locate
memory (method of re-writing is the same as
for cue memory). he value registered here
will be battery backed up even though the
main power is switched OFF.
»LOCATE
-32-