Fostex G24S Owner's Manual page 31

Methods of Changing the [ME ER] Display Mode
(1) o change the meter display mode, press in order: RCL key, ME ER button.
(2) Set the desired mode to be displayed by pressing the [. ] key, which will successively change the
display through each of the four modes, with each press of the key.
(3) he mode displayed in step 2 above will be registered by pressing in order: S O Key, ME ER
button. he content registered here will be battery backed up even though the main power is
switched OFF.
• he four types of bar graph ME ER display modes.
he following are the four modes displayed:
(a) Normal Mode (M noMAL)
his is the normal peak meter mode. he 12
segments of the bar graph ME ER represent
the levels, from bottom up, -20/-15/-10/-7/-5/-
3/-1/ 0/ +1/+3/+5/+8 (dB) against the refer ­
ence level (-10dBv).
BP LTCEXT GBi M) WXT
Bn IBnonBL.
H M • F
(b) Permanent Mode (M PArM)
his mode holds the uppermost segment
which is the peak value. Contents of the bar
graph ME ER 12 segments are the same as
with the normal mode.
o cancel, press ME ER key.
BP Lit EKI
(c) emporary Mode (M EMP)
his mode holds, for approximately 1 second,
the uppermost segment of the peak value.
he contents of the bar graph ME ER 12
segments are the same as with normal mode.
For setting the hold time refer to page (27).
BP LTC EXT «N W ERT
8n 188 IE nP,
a I
(d) Calibration Mode (M CAL)
his mode is for calibrating (zooming up) the
ME ER display to the reference of OdB. Finer
adjustments of levels are possible with this
feature. he 12 segments of the bar graph
ME ER represent the levels, from bottom up,
-5/-4/-3/-2/-1.5/-1/-0.5/0/ +0.5/+1 /+1 ,5/+2 (dB)
against the reference level (-10dBv).
OTE
If you want the same mode to be displayed
every time, press in order: S O key, ME ­
ER button.
OEM mo enef
-29-