Fostex G24S Owner's Manual page 28

OTE
If you make a mistake, press the CLR Key and start over.
"* Minus ime Data can be registered if the -/PREROLL Key is pressed before entering numbers from
the numerical keypad. When this key is pressedindicating minus time, data will be shown at left
end of the MEMORY display (it is not necessary to press the +/OFFSE key to register plus time
data). If you must return to plus time, press the +/OFFSE key to cancel the sign. If, for example,
62minutes is keyed in, time will be automatically converted to one hour, two minutes and registered.
3. After entering time data, press the S O key,
and selected n. he corresponding time will
be shown on the MEMORY display of cue
memory " n " .
OTE
When time data is registered in cue mem ­
ory, data previously stored there will be
cleared and the new data registered.
Method 2 - Changing the value recalled by [RCL] Key -» [n]
1. Press tn order: RCL key, n, to display data
registered in cue memory " n " on the MEMORY
display.
2. Press the [ ■ ] key to move the cursor to the
digit (H/M/S/F) to be corrected (cursor will
move to the left each time it is pressed). hen
re-enter time data of that digit using the nu ­
merical keypad.
Example: o change time data entered as:
1hour, 3min., 15sec., lOframes,
to 1hour, 6min., 15sec.,
lOframes, using the numerical
keypad to enter 0, 6 as shown
below:
•P ITCeCT OEM KWT
-DOU
IIS IE
M M • F
V
V
BP ITCEXT M SKI
0
1.01 IS 10.
H <1 1 F
V
Liccn
-26-