Fostex G24S Owner's Manual page 29

3. After correcting the time data, press the S O
key, and selected n (using the numerical key ­
pad), to store into cue memory u n " .
V
0
STO
Lit err
80 108 IS 10
H M * F
Method 3 * Real ime Registering by use of the [HOLD] Key
1. Playback the tape and monitor the playback
sound. Press the HOLD key upon arriving at
the point to be registered. he value of the
tapes present position as shown on the APE
IME display, will be copied on the MEMORY
display.
CP ITC Tit ROFFVET A OFFSET EDIT
80 1.083808
K M 9 F
2. Next, press the S O key, and selected n (us ­
ing the numerical keypad), to store into cue
memory " n " .
o
TP LTCEXT MN IND HXT
80 1383835,
Supplement: ime Data Correction by use of rim Mode
Instead of entering the time data using the numerical keypad, time data can be increased or decreased
by using the -/PREROLL key or +/ OFFSE key after entering the trim mode by pressing the RIM key.
he two trim modes are explained below.
(1) All digit trimming: rimming while shifting Up/Down All digits from H to F.
(2) wo digit trimming: rimming of any digit, individually, from H to F.
Method 1: All Digit rim Mode
(a) " All Digit rim Mode" can be entered by press ­
ing the RIM key ®. he RIM LED will light.
he MEMORY display, F (frame) only, will
blink; the others will be off.
I
LTCEXt MO EINT
80000000
a
-27-