Explained on the following pages are:
• How to handle the Remote Controller
• Applicable key operations for the various features provided
he Controller unit angle can be changed to 90'745*730° and 0° angles as shown below:
o change to 90°:
(a) Release the lock by pressing down the panel
lock release knob ©.
(b) Raise the panel to the horizontal position (90°).
It will lock automatically.
o change to 45° and 30°:
(a) As you lift the panel to the desired position,
press down on the levers on both sides.
(b) Slightly lower the panel to lock into position.
-21 -