Fostex G24S Owner's Manual page 32

OTE
he level setups in the calibration mode
on the left, and the level setups in the
normal mode on the right are shown against
the reference level (-1OdBv) which is di ­
vided into 12 segments.
-1MB*
H
B
■
2
5
■
1.5
3
■
1
1
0.5
0
□
0
1 □ 0.5
3
o
1
5
□
1.5
7
□
2
10
□
3
15
□
4
20 □ 5
(-> dB
H
he G16 has the following two types of individual
input monitor modes. he individual input moni ­
tor mode that the G16 is currently in can be
shown on the MEMORY display by this opera ­
tion.
V
• Method for changing Individual input monitor modes
1. Press in order: RCL key, INPU MON button,
to indicate the presently set mode on the
MEMORY display.
2. o display a desired mode press the [ • ] key
which will successively switch the display be ­
tween input monitor 1 and input monitor 2.
3. he mode displayed in above step 2 will be
registered by pressing in order : S O key,
INPU MON button.
1. Individual Input Monitor 1 (in Mon 1)
he individual input monitor 1 mode is entered by
pressing the RECORD button. he tracks en ­
tered into record ready status and input monitor
modes can be maintained in such modes even
though tape is moving in the play mode or in fast
forward/stop modes. his mode is a popular fea ­
ture on previous Fostex products. If the record
mode is entered (by pressing the RECORD but ­
ton and the PLAY button simultaneously) individ ­
ual input monitor mode will be cancelled. When
this mode is selected, the INPU MON LED will
blink slowly.
BP LtCÈxr GEM 2*«» EDIT
lì
in .nan
o L
H M B Î
V
MPUTMOM
his is convenient when the operator in the control room would like to listen to comments from the
musician(s) in the booth before starting the recording session.
-30-