12 GEMÜ 9428 electrical connection
1.
Disconnect the plant from power supply.
2.
Remove the protective caps 1.
3.
Unscrew cable entry 2.
4.
Undo screws 3.
5.
Do not lose the washers 4.
6.
Remove the cover of the actuator 5.
7.
Insert cable through cable entry 2.
Remove internal sealing ring if necessary.
8.
Connect cable (see chapter "Connection diagram 12 / 24
V" and chapter "Connection diagram 100 - 250 V").
9.
Put on cover of actuator 5.
10. Tighten cover 5.
11. Put on protective caps 1.
12. Screw down cable entry 2.
GEMÜ R488 Victoria
136 / 172
www.gemu-group.com