Assembly; Safety Information For Assembly; Requirements For Assembly - Spartherm Premium Assembly And Operating Manual

Assembly

4. Assembly
4.1

Safety information for assembly

. WARNING!
Danger due to non-adherence to assembly instructions!
incorrect assembly of the unit may lead to severe injuries. this
chapter contains important information for safe assembly of
the unit.
4 Carefully read this chapter prior to assembly.
4 Adhere to the the safety information.
4 perform the assembly work as described.
only qualified personnel may assemble the unit.
electrical work may only be performed by qualified
electricians.
, "1.2.3 Qualified personnel" (page 4).
the owner is responsible for meeting the requirements for the
installation site.
, "1.2.2 owner" (page 4).
to prevent danger, always adhere to the following
requirements:
•
do not store or deposit flammable materials or fluids on or
near the unit.
• do not position flammable objects (e.g. furniture, carpets,
flowers) in front of the firebox opening.
• ensure that the unit is undamaged and in perfect condition
prior to assembly.
• before assembling the unit, ensure that the prerequisites for
assembly and the requirements for the installation site are
met, in particular the legal requirements for fireplaces.
20 Assembly and operating manual | Premium & Lean | 06.2023 | en
4.2

Requirements for assembly

the stove system must be installed and operated according
to the valid standards and directives. note the following
documents and / or regulations prior to assembly:
• technical documents of the product.
• local fire safety regulations issued by the responsible
authorities.
• provisions under building law.
• relevant state building and firing installation regulations.
•
local construction regulations regarding the installation
conditions (e.g. firing installation regulations).
As an example, the following applies in germany:
§ Fireplace inserts fired by solid fuel according to
din en 13229.
§ residential solid fuel burning appliances according to en
16510-2-2:2022.
§ Chimney and flue gas connection according to din 18160.
§ Chimney dimensions according to din en 13384-1,
din en 13384-2.
§ blmschV second directive for implementation of the
german Federal immission Control Act.
§ trol professional regulations of the tiled stove and air
heater construction trade (ZVsHK).
3 the general technical approval has been given by the
building authorities or the manufacturer has applied for it.