Related Manuals for Spartherm Premium
Summary of Contents for Spartherm Premium
- Page 1 Assembly And operAting mAnuAl FIREPLACE INSERTS PREmIum & LEAN STATUS 06.2023 the fire of your life.
- Page 2 . ATTENTION! information marked with the word Attention indicates a situation that may lead to property or environmental damage. Assembly and operating manual | Premium & Lean | 06.2023 | en...
-
Page 3: Table Of Contents
4.8 Connecting the flue gas routing 4.9 Connecting the combustion air line (optional) 4.10 Installing the unit on site 4.11 Checking the installation 4.12 Performing initial start-up 4.13 Instructing the owner Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 4: Safety Information
• the users understand the dangers of handling the unit. • Children may not play with the unit. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 5: Behaviour In Emergencies
6 “5.1 safety information for use” (page 36). 6 “6.1 safety information for cleaning” (page 43). 6 “7.1 safety information for service work” (page 46). 6 “8.1 safety information for disassembly” (page 52). Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 6: Product Information
6 “4.7 Adjusting the counterweight (optional)” emission generation by fanning the flames. (page 27). Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 7: Models
A-3rl-60h premium A-3rl-80h 2.5 / 11 2.5 / 12 premium V-2l-55h premium V-2r-55h 2.5 / 5 2.5 / 6 premium A-u-50h premium A-u-70h premium V-2l-68h premium V-2r-68h Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 8: Product Overview
A door hood B solid screen C Firebox door with ceramic glass D door handle E Firebox with firebox lining F Ash grate G Ash pan (below the ash grate) Assembly and operating manual | Premium & Lean | 06.2023 | en... - Page 9 D safety ring B door lock E Counterweight C door locking mechanism F inspection port D baffle plate E Combustion air controller F Adjustable legs G Combustion air connector Assembly and operating manual | Premium & Lean | 06.2023 | en...
-
Page 10: Scope Of Delivery
29.7 31.4 34.6 requirement for room air dependent operation delivery pressure at 12.0 pa 12.0 pa 12.0 pa nominal heat output Weight 350 kg 351 kg 350 kg Assembly and operating manual | Premium & Lean | 06.2023 | en... - Page 11 12.0 pa 12.0 pa 12.0 pa 12.0 pa nominal heat output nominal heat output Weight 297 kg 298 kg 297 kg Weight 265 kg 267 kg 265 kg Assembly and operating manual | Premium & Lean | 06.2023 | en...
- Page 12 Weight 350 kg 351 kg delivery pressure at 12.0 pa 12.0 pa 12.0 pa nominal heat output Weight 310 kg 311 kg 310 kg Assembly and operating manual | Premium & Lean | 06.2023 | en...
- Page 13 12.0 pa 12.0 pa 12.0 pa 12.0 pa nominal heat output nominal heat output Weight 279 kg 280 kg Weight 337 kg 338 kg Assembly and operating manual | Premium & Lean | 06.2023 | en...
- Page 14 12.0 pa 12.0 pa 12.0 pa 12.0 pa nominal heat output nominal heat output Weight 235 kg 236 kg Weight 357 kg 358 kg Assembly and operating manual | Premium & Lean | 06.2023 | en...
- Page 15 12.0 pa 12.0 pa 12.0 pa 12.0 pa nominal heat output nominal heat output Weight 260 kg 261 kg Weight 231 kg 232 kg Assembly and operating manual | Premium & Lean | 06.2023 | en...
-
Page 16: Nominal Heat Output
6 “5.2.3 Controlling the heating process” (page 40). Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 17: 2.10 Dimensions
ø V diameter of combustion air connection the total width of the unit may be larger. ø A ø V total width of the unit: 873 mm. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 18: Types Of Fuel
5 We recommend beech wood as the ideal fuel. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 19: Permissible Types Of Fuel
• Flammable fluids and fire accelerants (e.g. ethyl alcohol or kerosene) – there is a risk of deflagration! • paper – burns fast and results in flying ash! Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 20: Assembly
• before assembling the unit, ensure that the prerequisites for assembly and the requirements for the installation site are met, in particular the legal requirements for fireplaces. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 21: Requirements For The Installation Site
8 pa from outdoors) and prevent gases from entering the room. A general technical approval must have been given by the responsible authorities. A Flammable construction material Assembly and operating manual | Premium & Lean | 06.2023 | en... - Page 22 – – 1000 1000 1200 1200 For components with a u value (heat transmission coefficient) > 0.4 W/m²K. if the u value is < 0.4W/m²K, observe country-specific requirements. Assembly and operating manual | Premium & Lean | 06.2023 | en...
- Page 23 At least 300 mm. – 1100 1100 For components with a u value (heat transmission coefficient) > 0,12W/m²K. if the u value is < 0,12 W/m²K , observe country-specific requirements. Assembly and operating manual | Premium & Lean | 06.2023 | en...
-
Page 24: Installation Dimensions
Height of combustion air connection 7 For further information and versions with an optional scope of delivery, refer to the separate document “technical unit dimensions: data”. 6 “2.10 dimensions” (page 17). Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 25: Convection Air Apertures
– on and in the wall. • local laws and regulations must be adhered to. § e.g. in germany, the relevant building regulations. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 26: Preparation For Assembly
4 ensure compliance with the chimney requirements. 4 perform a chimney calculation. 4 Check adherence to the required delivery pressure. 4 transport the unit to the installation site. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 27: Unpacking The Unit
4.6 / 1 4 detach the radiation protection plate from the unit. 4 remove the weight shaft lining. Assembly and operating manual | Premium & Lean | 06.2023 | en... - Page 28 For units with two weight shafts, perform this step on both 4 reinsert the safety ring. sides. 4 ensure that the firebox door closes slowly and with a constant speed. 4 tighten the safety ring. Assembly and operating manual | Premium & Lean | 06.2023 | en...
-
Page 29: Connecting The Flue Gas Routing
4 if necessary, remove the pre-punched section from the radiation protection plate. 4 position the unit, taking into account the requirements for the installation site. 6 “4.3 requirements for the installation site” (page 21). Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 30: Connecting The Combustion Air Line (Optional)
4 ensure that the flue gas pipe does not protrude into the chimney. 4 ensure that the pipe connections are sealed. 5 We recommend using a double wall lining for the connection to the chimney. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 31: 4.10 Installing The Unit On Site
500 mm distance between top edge and ceiling. insulation required if temperatures above 85 °C are possible (depending on the specific installation situation). insulation with shape-retaining mineral wool, min. 30 mm thick. Assembly and operating manual | Premium & Lean | 06.2023 | en... - Page 32 Within the convection chamber made of non-flammable material, provided no insulation is required. 500 mm distance between top edge and ceiling. insulation with shape-retaining mineral wool, min. 30 mm thick. Assembly and operating manual | Premium & Lean | 06.2023 | en...
- Page 33 (e.g. when replacing the window). 4 When creating the convection chamber, ensure that the support frame and the screen are not positioned lower than the door hood of the unit. Assembly and operating manual | Premium & Lean | 06.2023 | en...
- Page 34 4 ensure that the firebox door is easy to open and move. 4 Fasten the drawbars on the wall or ceiling. 4 Align the screen horizontally (e.g. using a spirit level). Assembly and operating manual | Premium & Lean | 06.2023 | en...
-
Page 35: Checking The Installation
4 perform another combustion process. the burn-in process up to the temperature reached in the final combustion process is complete. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 36: Safety Information For Use
4 do not reach into the closing area. 6 “1.4 Chimney fire” (page 5). 4 Wear protective gloves. Assembly and operating manual | Premium & Lean | 06.2023 | en... - Page 37 A-u-50h – 850 mm front, 1000 mm side • premium A-u-70h – 850 mm front, 1100 mm side • lean 3rl-70h – 800 mm front, 800 mm side Assembly and operating manual | Premium & Lean | 06.2023 | en...
-
Page 38: Heating Mode
C Air supply open. the maximum combustion air volume is supplied to the firebox as primary and secondary air. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 39: Heating Up The Unit
Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 40: Controlling The Heating Process
4 Familiarise yourself with the unit and find out what the best settings are. position of the combustion air slider with tested nominal heat output: 6 “2.9 nominal heat output” (page 16). Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 41: Refuelling The Unit
4 ensure that the embers are not extinguished as you refuel. 4 Close the firebox door. do not exceed the maximum fuel volume. 6 “2.8 technical data” (page 10). Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 42: Ending The Heating Process
4 Allow the fire to extinguish for a sufficiently long period (e.g. over night). 4 ensure that the combustion air controller is in the bottom- most position (A). Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 43: Cleaning
4 Wear work clothing and protective gloves. 4 ensure that the open firebox door has been secured against falling shut. 6 Figure 5.2.1 / 2 (page 38). Assembly and operating manual | Premium & Lean | 06.2023 | en... - Page 44 4 ensure that the cleaning agent does not make contact with seals or varnished surfaces. After cleaning, close the front window again and lock the front window and side window. Assembly and operating manual | Premium & Lean | 06.2023 | en...
-
Page 45: Annual Cleaning
6 “6.3 simple cleaning” (page 43). 4 ensure that the cleaning agent does not make contact with seals or varnished surfaces. After cleaning, close and lock the side windows again. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 46: Service Work
6 Figure 5.2.1 / 2 (page 38). 7 perform maintenance according to the pipe manufacturer’s only qualified personnel may replace or repair components. specifications. 4 Contact the manufacturer or a specialised company. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 47: Firebox Door
D base brick, rear left E base brick, rear right F base brick, front left G base brick, front right H Ash grate 4 remove the ash grate. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 48: Self-Closing Firebox Door
4 remove a suitable number of counterweights. 4 reinsert the safety ring. 4 ensure that the firebox door closes slowly and with a constant speed. 4 tighten the safety ring. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 49: Malfunction Repair
4 only insert the volume of fuel required for the heating 4 Close the inspection openings. output. • the chimney is clogged (e.g. by a bird nest). 4 Have the chimney checked by a specialised company. Assembly and operating manual | Premium & Lean | 06.2023 | en... - Page 50 4 ensure that the locking mechanism of the combustion air line is open. 4 Check the air supply from outside (e.g. external air grid not blocked). 4 Clean the combustion air line. Assembly and operating manual | Premium & Lean | 06.2023 | en...
- Page 51 4 Have the cable replaced by a specialised company. if a malfunction cannot be repaired: 4 Contact the manufacturer or a specialised company. Assembly and operating manual | Premium & Lean | 06.2023 | en...
-
Page 52: Disassembly
For cleaning work, remove the baffle plate from the firebox. 6 “6. Cleaning” (page 43). Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 53: Disposal
4 dispose of the packaging in an environmentally friendly manner, separated by the types of material. Assembly and operating manual | Premium & Lean | 06.2023 | en... -
Page 54: Appendix
DIN 4751 / DIN EN 12828: Heating systems in buildings – design for water-based heating systems. • VDI 2035: Water treatment for heating systems. • Art. 15a: Federal Constitutional law (Austria). Assembly and operating manual | Premium & Lean | 06.2023 | en... - Page 55 Assembly and operating manual | Premium & Lean | 06.2023 | en...
- Page 56 SPECIALIST DEALER www.facebook.com/spartherm www.instagram.com/spartherm www.youtube.com/sparthermgermany www.spartherm.com Spartherm Feuerungstechnik GmbH Maschweg 38 | 49324 Melle | GERMANY | Phone: +49 5422 9441-0...