Scope Of Delivery; Assembly Instructions; Description Of Function - Spartherm Ebios-Fire Quadra Inside Automatic I SL Installation And Operating Manual

In Germany, this is the general ruling for residential accommodation:
Storage in a cellar: max. 20 litres
Storage in the living area: max. 5 litres
(Source: Data sheet of information on hazardous substances issued by the German trade association for raw
materials and the chemicals industry [Berufsgenossenschaft Rohstoffe und chemische Industrie], as well as
technical rules for combustible liquids 20)
Please pay attention to the contents of this Operating Manual.

1.1 SCOPE OF DELIVERY

ebios-fire with the following features:
• Quadra Inside Automatic I SL or II SL housing with burner channel made
of stainless steel
• Installation frame for holding the burner (not in conjunction with other
ebios products for installation of the burner)
• 1 x canister connection with 2 x hose connections
• 1 x inlet hose (standard length: 2.5 metres / Optional: up to max. 8
metres)
• 1 x overflow hose (standard length: 2.5 metres / Optional: up to max.
8 metres)
• Remote control
• Tabletop power unit with a 1.8 metre length of cable.

2. ASSEMBLY INSTRUCTIONS

Please follow the information below carefully. Bear in mind that bioethanol
is a liquid fuel which is highly flammable and which results in high local
temperatures when burnt. Please also note that the luminosity of the flame
can decrease to such an extent that the flame is no longer clearly visible.
Make children and others in the home aware of this. Failure to comply with
the instructions for installation and operation can result in dangerous situ-
ations and even explosion of the fuel.
Proper installation and handling can ensure safe and reliable operation. The
appliance must not be set up in a standalone configuration and must be
positioned horizontally. The burner must not be moved while in operation.
Construction measures must prevent it from toppling or tilting under any
circumstances.

2.1 DESCRIPTION OF FUNCTION

Once the burner is supplied with an operating voltage, it can go into opera-
tional readiness mode by actuating the switch on top of the burner. The
remote control is then used to initiate the combustion process. During this
phase, a pump is operating all the time, and glow ignition is triggered once
the level is high enough. At this point, the burner channel fills with fuel that
then ignites.
The integrated pump delivers fuel to the channel until the level reaches the
fill level sensor. At this point, the pump shuts down.
The level drops as the fuel burns. Whenever the level sensor no longer
detects any fuel, the pumps are restarted until the level reaches the sensor
again.
GB 5
GB