Connecting The Flue Gas Routing - Spartherm Premium Assembly And Operating Manual

4.8

Connecting the flue gas routing

4.8 / 1
4 loosen the V-band clamp from the flue gas connection.
4 Correctly align the flue gas connection on the unit.
4 re-tighten the V-band clamp.
to guide the flue gas pipe rearward to the wall by the shortest
path, it is possible to adapt the radiation protection plate.
For other flue gas paths (e.g. flue gas pipe to the ceiling),
the radiation protection plate remains unchanged.
4.8 / 2
4 if necessary, remove the pre-punched section from the
radiation protection plate.
4.8 / 3
4 Fasten the radiation protection plate in the assembly
position on the unit.
4.8 / 4
4 position the unit, taking into account the requirements for
the installation site.
6 "4.3 requirements for the installation site" (page 21).
Assembly and operating manual | Premium & Lean | 06.2023 | en 29