Spartherm Premium Assembly And Operating Manual page 34

Assembly
if required, the position of the support frame and the screen
can be re-adjusted while they are installed. this adjustment is
made with the aid of the drawbars.
4.10 / 5
4 set the position of the support frame and screen so that
they are flush with the door hood of the unit.
4 ensure that the firebox door is easy to open and move.
34 Assembly and operating manual | Premium & Lean | 06.2023 | en
in the case of convection chamber attachments that are flush
with the ceiling or attachments with a high weight, the screen
must be fastened on site (e.g. using drop-in anchors combined
with steel link chains).
4.10 / 6
4 detach the drawbars from the unit.
4 Fasten the drawbars on the wall or ceiling.
4 Align the screen horizontally (e.g. using a spirit level).